The Black & Decker Thermal Leak Detector helps you increase the efficiency of your home’s insulation by finding weak areas that can lead to higher heating and cooling bills. You’ll instantly identify problem areas around drafty windows and doors, and uncover hidden leaks and insulation “soft spots” around your home. Check windows, ducts, and walls with the thermal reference light that indicates hot and cold spots. You can even use the detector to diagnose engine misfires or check your refrigerator and freezer settings.
The Thermal Leak Detector makes it easy to monitor your home’s energy efficiency by finding areas that let heat out and cold air in. Simply set the detector’s temperature tolerances to one, five, or 10 degrees and scan the light across the area you want to inspect. The light will change to red for warmer spots and blue for cooler spots to detect air leaks in both warm and cool weather. The detector also displays temperatures in either Fahrenheit or Celsius on the LCD screen. Check for drafts or leaks around your fireplace, recessed lighting, electrical outlets, along floor molding, or any place that may have improper seals, caulking, or seams that aren’t immediately visible. An included booklet gives you tips and instructions on how to seal leaks and improve insulation.
Technical Details:
Uses infrared sensors to measure surface temperatures
Helps homeowners track down power-draining drafts
Sold with a 5 step guide to fixing basic energy leaks comes with the thermal leak detector, offering guidance on everything from caulking to weatherproofing windows and doors
Plugging leaks can save up to 20-Percent on heating and cooling costs!
Customer feedback:
1. This is a big improvement over the regular thermal detectors (I have a Craftsman I was given as a gift already). Instead of trying to keep looking at the ever-changing digital readout – this tool allows you to look right at where you are pointing it to see the changes in hot or cold. Fun and much easier to use than the regular variety.
2. Even if you are an unfortunate non-tech “regular” person. Man, what fun to aim and read this dandy little hand-held temperature detector. This device reads the temperature difference between a “reference point” and wherever else it is pointed around the house (probably only from the inside!). The trick here is to see where temperatures are somewhat lower than the reference point. The reference point, by the way, should be some wall or surface that you suspect is kind of the “average” temperature of the house. This means that the home owner can more easily track down places where cold outdoor air could be leaking in, or where the insulation does not stop heat losses like they should. Leaks almost certainly will be the big heat loss killers (or heat gain into an air conditioned space inside in the summer).
